Elox and Aluminium CleanerNeutral cleaner for elox and aluminium surfaces with care effect. This product was developed for cleaning anodized aluminium (elox) and aluminium. It is more user- and environmentally friendly due to its water-based formulation. The fine abrasive particles contained in the product ensure thorough but mild cleaning results. After cleaning, a very fine film remains behind which protects the surface from resoiling temporarily.
Contents: <5% aliphatic hydrocarbons, <5% nonionic surfactants, paraffin oil, organic solvents, conservation agent, and water.
pH:Concentrate: 9.5 – 10.5 Ready-to-use-solution: not applicable
Dilution: Apply undiluted.
Packaging: Box of 4 x 5L Art. 700005
Application methods:
GRAFO – FGRAFO – F is a liquid graffiti remover for a large number of surfaces inside and outside.
It removes spray paints, felt-tip pen and ball-point from smooth surfaces and is ideal as a pre-spray for porous surfaces when applying GRAFO-G afterwards. The product is easily rinsed off with water and biologically degradable. Its composition allows for its use under 0°C.
Contents: 5-15% nonionic surfactants, 15-30% aliphatic hydrocarbons, perfume (d-limonene), and organic solvents.
pH:Concentrate: not applicable Ready-to-use-solution: not applicable
Dilution: Apply undiluted.
Packaging: Box of 12 x 1L Art. 96551, Box of 4 x 5L Art. 96505
Application methods:
GRAFO – GGRAFO – G is a graffiti remover in gel form for a large number of surfaces outside.
It removes spray paints, felt-tip pen and ball-point from smooth and porous surfaces. The product is easily rinsed off with water and biologically degradable. Its composition allows for its use under 0°C.
Contents: 15-30% nonionic surfactants, 15-30% aliphatic hydrocarbons, perfume (d-limonene), organic solvents, and rheological additive.
pH:Concentrate: not applicable Ready-to-use-solution: not applicable
Dilution: Apply undiluted.
Packaging: Box of 12 x 1L Art. 96651, Box of 4 x 5L Art. 96605
Application methods:
GRAFO – PGRAFO – P is a mild, liquid graffiti remover for smooth and sensitive surfaces inside and outside.
GRAFO – P is especially suited for plastics and plexiglass as well as painted surfaces due to its mild formulation. It may also be used successfully on carpets that have been stained using felt-tip or spray paint.
Contents: <5% nonionic surfactants and organic solvents.
pH:Concentrate: not applicable Ready-to-use-solution: not applicable
Dilution: Apply undiluted.
Packaging: Box of 12 x 0,5L Art. 96751, Box of 4 x 5L Art. 96705
Application methods:
Hurricane – AHighly alkaline façade cleaner.
This product may be used in any method and removes even extreme dirt caused by pollution and other environmental influences. It may also be used as a shadow remover (residue remover) in graffiti removal. The high alkalinity neutralizes typical environmental contaminations and binds them in the rinse water.
Contents: <5% anionic surfactants, <5% NTA, 5-15% EDTA, perfume (lillial, amylcinnamal), complexing agents, sodium hydroxide, dye, and water.
pH:Concentrate: 12.5 – 13.5 Ready-to-use-solution:11.5 – 13.0
Dilution: Dilute 1:1 to 1:50 with water and apply.
Packaging: Box of 4 x 5L Art. 530005
Application methods:
Hurricane – SHighly acidic façade cleaner.
A concentrated strongly acidic cleaner for façades made of face brick as well as all acid resistant and silicate-bound natural and synthetic stones, sandstone, clinker brick, ceramic surfaces, as well as glazed tiles. Hurricane – S dissolves atmospheric soil, grease, fat, oil, wax, tough residues from organic and inorganic matter, moss, algae, fungus, and sponge plaque.
Contents: <5% nonionic surfactants, inorganic acid, fluoride salt, and water.
pH:Concentrate: 0.5 – 1.5 Ready-to-use-solution: 1.8 – 2.2
Dilution: Depending on the degree of contamination dilute 1:1 to 1:20 with water.
Packaging: Box of 4 x 5L Art. 531005
Application methods