Specialty Products

Fire Damage Restoration – Specialty Products

Chemical SpongeDry removal of soot. For the dry removal of soot  from water sensitive surfaces such as paintings, books, upholstery, wall paper, etc. The Chemical Sponge makes removal possible without damaging valuable items and also prevents soot from penetrating deeper as would be the case with a moist or wet treatment of same material.
Packaging: Piece Art. 150000

Chloride Quick TestQualitative determination of chloride contamination. For the quick, qualitative determination of chloride residues on surfaces such as metal, painted surfaces, plastics, etc. The Chloride Quick Test gives a quick insight to the presence of chloride contamination.
Packaging: Piece, Box with 30 test strips Art. 146000

Complex DerusterMild rust remover for the restoration of metal and machine parts.
Complex Deruster is a weakly acidic cleaner based on citric acid for mild derusting action. It is used everywere there are high demands on tolerances of metals and metal parts.
Contents: <5% nonionic surfactants, <5% NTA, perfume, acid, and water.

pH:Concentrate: 3.0 – 4.0 Ready-to-use-solution: 4.0 – 5.0
Dilution: Dilute 1:1 to 1:5 with water and apply.
Packaging: Box of 4 x 5L Art. 97905
Application Methods:

ConserverSpecialty product for protection from corrosion during temporary storage in the restoration process.
Conserver is a corrosion inhibitor and water displacer. After the solvent evaporates it leaves behind a protective film for temporary storage. With one litre of Conserver approximately 100 – 150 m2 surface may be protected.
Contents: ≥30% aliphatic hydrocarbons, 5 – 15% nonionic surfactants, 5 – 15% anionic surfactants, plant-based oils.
pH:Concentrate: not applicable Ready-to-use-solution:not applicable
Dilution: Apply undiluted.
Packaging: Box of 4 x 5L Art. 97405
Application Methods:

Electro Cleaner – ONon-conducting cleaner for electronic parts in fire damage restoration.
Solvent-based specialty cleaner for electronic parts. Its formulation makes it non-conductive thereby allowing time-saving application (no complete drying necessary) when chloride contaminations are not present.
Contents: ≥30% aliphatic hydrocarbons.
pH:Concentrate: not applicable Ready-to-use-solution:not applicable
Dilution: Apply undiluted.
Packaging: Box of 4 x 5L Art. 94405
Application Methods:

Electro Cleaner – WWater-based cleaner for electronic parts in fire damage restoration.
Alkaline water-based specialty cleaner for electronic parts. This product is used instead of Electro Cleaner-O whenever chloride contamination is present.
Contents: <5% anionic surfactants, 5 – 15% nonionic surfactants, perfume, builders, solvents, complexing agents, and water.
pH:Concentrate: 12.5 – 13.5 Ready-to-use-solution: 12.0 – 13.0
Dilution: Dilute 1:6 to 1:30 with water and apply.
Packaging: Box of 4 x 5L Art. 94105
Application Methods:

ManophosRust remover, degreaser, bonderizer. 
A strong, acidic cleaner with high rust, soil, and fat removing abilities. This product may also be used as a manual bonderizer.
Contents: Phosphoric acid, solvents, corrosion inhibitor, and water.
pH:Concentrate: 0.5 – 1.5 Ready-to-use-solution: depends on dilution ratio
Dilution: See label or Product Data Sheet.
Packaging: Box of 4 x 5L Art. 93805
Application Methods:

OEL 100AOil/Oil heater damage restoration product.
OEL 100A makes an effective removal on a variety of surfaces possible followed by complete separation and efficient disposal. This product is a fast emulsifier but the emulsion is only stable for a brief time. This allows for an effective removal of the oil with easy separation and suitable disposal.
Contents: 5 – 15% nonionic surfactants and water.
pH:Concentrate: 6.5 – 7.5 Ready-to-use-solution: 6.5 – 7.5
Dilution: Dilute 1:50 to 1:100 with water.
Packaging: Box of 4 x 5L Art. 121005
Application Methods:

SootFixSoot binder.
Loose soot is fixated by applying Soot Fix. Smearing and circulation of soot is thereby prevented. This is especially advantageous in areas where removal is difficult or not possible.
Contents: Perfume (cinnamaldehyde, citronellol, d-limonene, geraniol), acrylates, solvents, wetting agents, and water.
pH:Concentrate: 8.5 – 9.5 Ready-to-use-solution: not applicable
Dilution: Apply undiluted – approx. 1 litre for 10 sqm.
Packaging: Box of 4 x 5L Art. 95505
Application Methods:

Wood Cream RestorerCleaning, caring, and deodorizing paste for untreated wood surfaces.
Removes smoke and soot residues from the pores of porous surfaces such as wood, cork, etc. with follow-up care effect.
Contents: ≤30% aliphatic hydrocarbons, perfume (cinnamaldehyde, citronellol, d-limonene, geraniol), plant-based oils, alkalis, and water.
pH:With10g/litre water: 7.5 – 8.5
Dilution: Apply undiluted. Depending on the surface use a clean cloth or fine steel wool.
Packaging: Box of 12 x 800g Art. 90008, Box of 4 x 4,5Kg Art. 90095
Application Methods:

Theme: Overlay by Kaira Extra Text
Hamburg, Germany